Reboot and select the proper boot device, might be something annoying when you open your computer. To get rid of this error, here we have provided you the steps to fix this issue.
What are reboot and select proper boot devices mean? You might come across this error due to the corrupted system files, failure of the hard disk. Or if you have cloned up with the system boot order you might come across this error.
If you are also coming around this error reboot and select the proper boot device. In this article, we have provided you the steps to fix this issue. Keep reading this article until the end so that you might not get confused while performing these troubleshooting methods.
How to Fix Reboot and Select Proper Boot Device
The error reboot and select proper boot device windows 10 seems to be accessible. This error might appear on the black screen on your computer while you start up your windows. Here we have provided you the effective ways to fix this issue on your device.
Check out Power Cable Connections
Let your hard drive be connected to your motherboard with the Power cable. This hard drive stores your operating system. The hard drive is not detected by the computer if it is worn, broken, or even not connected properly. Here we have provided you the steps to check out power cable connections.
- First, you need to shut down your computer and open it up.
- First, you need to find out the power cable that is running from the hard disk drive to your motherboard and then check if there is any damage to your cable.
- If you have connected the cable properly and still encountering the error, you have to remove that cable, connect another cable, and perform the test.
- If you have found a problem with your cable, you have to replace it with a new cable.
If this doesn’t help you fix the problem, try to perform another troubleshooting method that helps you to fix the issue.
Selection of the Wrong Drive in Bios
If the above troubleshooting method doesn’t help you fix the issue, then you have to try to check if your hard drive recognizes your Bios and even system boot order. Moreover, when you are trying to load the operating system or even when you are trying to replace something the computer will check for the hard drive.
So, to check this out, you need to type the BIOS
- First, you have to click the Bios/UEFI access key during the process of booting. The access key might differ for the computer which might be either F2, F10, DEL, ESC.
- Now, you have to locate the menu with the title Boot or similar, once the BIOS loaded. For the different motherboards manufacturers, this name might be varied and the BIOS in use, but note that the menu content will be the same.
- Check out the hard drive is in the list and then check if it is the boot position are the two things that you need to check. The first thing that needs to be load should be the hard drive that contains the operating system and should be the Boot option1 and BIOS equivalent. You should have to be sure that the hard drive that contains the operating system should be in the first boot position.
- Finally, save the bios settings and reboot your device.
Once you have rebooted your system, the operating system should have to load properly.
Find Boot Order in BIOS
Reboot and select proper boot device or insert boot media in selected boot device and press a key might encounter if the boot sequence can mess up. You have to boot the computer, if you would like to check the boot order in your BIOS and with the post screen key,, you have to enter the BIOS. To do so follow the given below methods.
- In the BIOS, navigate to the “Startup” or the “Boot” screen. Moreover, you can view the boot order on the main screen of the Newer BIOS systems.
- If you didn’t found the boot sequence from the above step, now you can try the advanced BIOS features to find it.
- Make ensure that the boot disk should be the first device that needs to be listed in the boot sequence list.
- Moreover, if you have found that the boot disk appears in the list but does not in the first position, you have to move it to the first position. Moreover, in the BIOS system, you can drag and drop the drop order, whereas for the older BIOS system you have to make use of the arrows.
- Once, you have positioned the boot drive to the first position, save the changes and then reboot your device.
If this doesn’t help you to fix the issue, then try to perform another troubleshooting method to fix the issue
- best photo viewer windows 10
- how to download videos from any website
- windows cannot be installed to this disk
Enable or Disable Legacy Boot
IN some of the cases, you might come with the feature named legacy boot in the input/output system(BIOS). This might cause the error “Reboot and Select a proper boot device”. Therefore, in such cases disabling or enabling it might help you to fix the issue. To do so follow the given below methods.
- First, you have to restart your computer and then input the BIOS.
- Now you have to locate the option “Legacy Boot”, by heading through all the tab settings in BIOS.
- Once you have located the legacy option, they may need to disable it if you have enabled it or enabled it if you have disabled it.
- Next, save all the changes and quit the BIOS.
- Now, restart your computer.
Once you are done with this, check if the issue reboot and select proper boot device Asus are fixed or not.
These are the methods that help you fix the issue reboot and select the proper boot device. Try the following methods as any one of the methods might help you to fix the issue. If you have doubts regarding the issue select the proper boot device then make sure to comment on the issue in the comment section. Stay tuned to Basictricks for more updates.